The next step to patching the fenders is cutting and welding them into place. First I start by attaching them with vise grips to the part of the original that is to be patched. Then I cut 1/4″ into the patch that is clamped on while taking the original metal off with it. The first side is then beat into place with a hammer and dolly. After  I determine it is flush I weld it in place and repeat this process for the remaining sides. After the panel is welded in I grind down the weld to create a flush surface. After grinding I dolly it all flush creating a surface that matches the original. Be sure to check back as the restoration progresses, and happy 4th of July.